E2A-M30KN20-WP-B1 2M | OMRON Cylindrical Proximity Sensor E2A-M30KN20-WP-B1 2M

Power supply: DC.
Output type: PNP.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching) OMRON E2A-M30KN20-WP-B1 2M.
Easily perform calculation for two Sensors by using a Calculating Unit E2A-M30KN20-WP-B1 2M
Prevent mutual interference for up to five Units by using a Calculating Unit. Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Stainless steel.
Thread length (overall length): 27 (43).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance OMRON E2A-M30KN20-WP-B1 2M.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-DC200BR type: standard type; soft (new standard),
Specialty: M6 screw with casing,
Bending radius (mm): R; R1 OMRON E2A-M30KN20-WP-B1 2M.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSize: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 49 (62).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminaated E2A-M30KN20-WP-B1 2M.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-L24L type: special light beam type; limited reflection,
Speciality: heat resistance oof 105 DEG C: 4 level,
Bending radius (mm): R10 E2A-M30KN20-WP-B1 2M.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs