OMRON
Home >> Products >> OMRON >> Security products >> Safety door switch >> D4GS-N1T-5 | OMRON Slim Safety Door Switch D4GS-N1T-5

D4GS-N1T-5 | OMRON Slim Safety Door Switch D4GS-N1T-5

OMRON D4GS-N1T-5 Manual And Instructions
D4GS-N1T-5 datasheetPDF datasheet
D4GS-N1T-5 INSTRUCTION sheet

OMRON D4GS-N1T-5 Product information and technical parameters:
Brand: OMRON
Name: Slim Safety Door Switch
Model: D4GS-N1T-5
Direction of Operation Key insertion: Vertical.
Cable length: 5 m.
1NC/1NO(Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection.

Number of beams: 45.
Protective height: 2220mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions OMRON D4GS-N1T-5. Number of beams: 86.
Protective height: 1745mm.
Model: NPN output.
Basic Type with a combination of D4GS-N1T-5
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Main contacts: DPST-NO.
Auxiliary contact: None.
Number of input channels: 1 channel or 2 channels OMRON D4GS-N1T-5.
Reset mode: Manual reset.
Input type: + common.
Rated voltage: 24 VAC/VDC.
Ultra Slim Safety Relay Unit.
Models of width 17.5 mm available with 2 or 3 poles. Models.
of width 22.5 mm with 3 poles also available.
Conforms to EN standards. (TÜV approval).
DIN track mounting possible. Release key type: Special release key.
Indicator: Orange.
Lock and release types: Solenoid lock Mechanical release OMRON D4GS-N1T-5.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+3NC.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Number of beams: 92.
Protective height: 1840mm.
Safety Light Curtains with Durable,
Impact-resistant Body and Long,
20-m Sensing Distance.
MS/MSF4800A Advanced Series.
Programming and Diagnostics Module (PDM) makes it easy,
to set functiions D4GS-N1T-5.
Series connection is possible only with the MSF4800A.
Blanking can be set.
Muting is possible only with the MSF4800A by using the,
MS4800-RM6 Resource Module.
MS/MSF4800B Basic Series,
Features all necessary basic Safety Lightt Curtain functions D4GS-N1T-5.
Series connection is possible only with the MSF4800B.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions.


...More relevant models >>>>