CQM1-B7A03 | OMRON B7A Interface Module CQM1-B7A03

Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).Specifications: 16 Kwords with clock.Number of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.I/O points: 256 pts.
Program capacity(words): 7 OMRON CQM1-B7A03. 2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES CQM1-B7A03Analog outputs: 2 pointsNumber of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 4 mA.Number of outputs: 16 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Shared.Specifications: 16 Kwords without clock.Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114) OMRON CQM1-B7A03. Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.I/O points: 256 pts OMRON CQM1-B7A03.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Pulse I/O: YES.Number of outputs: 6 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (PNP) output, 2 loops.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.Expands G730 input capacity of G730 remote mmaster;
adds 32 or 16 inputs,
DIP switch selected CQM1-B7A03. Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max.
Dimensions: 255 × 110 × 107 mm (W × H × D) CQM1-B7A03.
Weight: 90 g max.
Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).