C200HS-SLK22 | OMRON SYSMAC LINK Co-axial Power Supply C200HS-SLK22

Model: C200H-OD214.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.Name: SYSMAC LINK Module.
Model: C200HW-SLK24.
Communications method: N: N token bus.
Transmission method: Manchester code, base band.
Transmission path: Bus.
Weight: 400 g max.Remote use, microwave transmission for long distance OMRON C200HS-SLK22.
ID sensor unit is a kind of non contact type identification system,
For unified products, unified production and unified control data,
Effectively produce quantity of products C200HS-SLK22
Information on the factory automation identification system, there are classified samples can be provided.Name: PC Link Module.
Model: C200H-LK401.
Communications method: 2-conductor, half duplex OMRON C200HS-SLK22.

PC Link Unit
Distributed control using the PC Link Unit.Model: C200HW-ME16K.
Capacity: 16K words.Connects Power Supply Adapter and SYSMAC NET Link Unit.
For 2 Unit.C200H Power Supply Aux PS for SLK11 C200H-APS03.
Required when supplying backup power.Name: Heat/Cool Temperature Control Module.
Model: C200H-TV101.
Sensor: Platinum resistance thermometer: JPt100, Pt100 OMRON C200HS-SLK22.
Control output: Transistor output.100 to 120/200 to 240 VAC (Supports SYSMAC LINK and SYSMAC NET Link Systems.)Model: C200H-ME431.
Description: EEPROM, 4K words, no clock.Model: C200HW-PA204.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC.
Comments: ---.Model: C200H-OC224N.
No. of points: 8 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads)Independent commons.Model: C200HW-COM05-V1.
Specifications: Two RS-232C ports and a protocol macro function.Model: C200H-OD211.
No. of points: 12 pts.
Specifications: 0.3 A, 24 VDC.Model: C200H-MR831.
Description: RAM, 8K words, battery back-up. no clock.Model: C200H-MR832.
Description: RAM, 8K words, capacitor back-up.no clock.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected too a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program C200HS-SLK22.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaations procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components C200HS-SLK22.