Home
>> Products
>> OMRON
>> C200HE/C200HW/C200HG/C200HX/C200H PLC
>> C200H series PLC high performance I/O unit
>> C200H-TS002 | OMRON Temperature Sensor Module C200H-TS002
C200H-TS002 | OMRON Temperature Sensor Module C200H-TS002
OMRON C200H-TS002 Manual And Instructions
C200H-TS002 INSTRUCTION SHEET
OMRON C200H-TS002 Product information and technical parameters：
Brand: OMRON
Name: Temperature Sensor Module
Model: C200H-TS002
Model: C200H-TS002.
Temperature sensor: Thermocou-ples: K (CA)/L (Fe-CuNi)(DIN)(selectable)
Input points: 4 points/Unit max. (1, 2, or 4 points can be selected)
...More relevant models >>>>
C200H-TS002 INSTRUCTION SHEET
OMRON C200H-TS002 Product information and technical parameters：
Brand: OMRON
Name: Temperature Sensor Module
Model: C200H-TS002
Model: C200H-TS002.
Temperature sensor: Thermocou-ples: K (CA)/L (Fe-CuNi)(DIN)(selectable)
Input points: 4 points/Unit max. (1, 2, or 4 points can be selected)
Name: Position Control Module.
Model: C200HW-NC213.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 2.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit OMRON C200H-TS002.
The following power units are available for selection C200H-TS002
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program OMRON C200H-TS002.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required.
No PC card is provided with the Unit OMRON C200H-TS002. Model: C200H-OA223.
No. of points: 8 pts.
Specifications: 1.2A, 250VAC.C200HW Communications Interface Module C200HW-PRM21C200HS-CPU31-E CPU
High-Performance CIM Version, Built-in RS-232C Port
The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic functionality as the C200HS-CPU01-E/CPU03 controllers.
This CPU may be used ineither SYSMAC NET and/or SYSMAC LINK communication systems.
The built-in RS-232C port supports the same communications as the C200HS-CPU21/CPU23.Model: C200H-ID218.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 180g max.Model: C200HW-COM02-V1.
Specifications: One RS-232C port.Connect PC/AT IBM or compatible machine, as LINK SYSMAC system node C200H-TS002. Model: C200H-OC224.
No. of points: 8 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads)Independent commons.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.
Name: ASCII Moodule C200H-TS002.
Model: C200H-ASC02.
ASCII/BASIC Module Utility Software: For AT-compatible computers. enables program development, downloading, uploading, etc.
Model: C200HW-NC213.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 2.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit OMRON C200H-TS002.
The following power units are available for selection C200H-TS002
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program OMRON C200H-TS002.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required.
No PC card is provided with the Unit OMRON C200H-TS002. Model: C200H-OA223.
No. of points: 8 pts.
Specifications: 1.2A, 250VAC.C200HW Communications Interface Module C200HW-PRM21C200HS-CPU31-E CPU
High-Performance CIM Version, Built-in RS-232C Port
The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic functionality as the C200HS-CPU01-E/CPU03 controllers.
This CPU may be used ineither SYSMAC NET and/or SYSMAC LINK communication systems.
The built-in RS-232C port supports the same communications as the C200HS-CPU21/CPU23.Model: C200H-ID218.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 180g max.Model: C200HW-COM02-V1.
Specifications: One RS-232C port.Connect PC/AT IBM or compatible machine, as LINK SYSMAC system node C200H-TS002. Model: C200H-OC224.
No. of points: 8 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads)Independent commons.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.
Name: ASCII Moodule C200H-TS002.
Model: C200H-ASC02.
ASCII/BASIC Module Utility Software: For AT-compatible computers. enables program development, downloading, uploading, etc.
...More relevant models >>>>
Last one: OMRON Temperature Sensor Module C200H-TS001
next one: OMRON Temperature Sensor Module C200H-TS101
Related download