This program runs independently from the ladder-diagram program in the PLC.
Name: ASCII Module.
Model: C200H-ASC02.
ASCII/BASIC Module Utility Software: For AT-compatible computers. enables program development, downloading, uploading, etc.
Model: C200H-OD216.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.No. of I/O slots: 3 slots.Model: C200H-MAD01.
External input points: 2.
External output points: 2.
External input signal range: 1 to 5 V or 0 to 10 V or –10 to 10 V.
External output signal range: 1 to 5 V or 0 to 10 V or –10 to 10 V OMRON C200H-ASC02. Model: C200H-DA001.
Input points: 2
C200H-ASC02
Voltage input: 1 to 5V or 0 to 10 V.
Current input: 4 to 20 mA.Model: C200HW-ME08K.
Capacity: 8K words.Model: C200H-B7AI1.
I/O points: 16 points or 15points and 1 error input
Weight: 200g max.Model: C200H-DA004.
Input points: 8.Name: Heat/Cool Temperature Control Module.
Model: C200H-TV002.
Sensor: Thermocouple: R, S, K, J, T, E, B, N, L, U OMRON C200H-ASC02.
Control output: Voltage output(transistor output used for cooling outputs).Capacity: 32K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPROM memory card into the CPU, to connect the EPROM to the EPROM memory card.
If you remove the EPROM memory card from the CPU,
Will not lose its data OMRON C200H-ASC02. Model: C200HW-ME16K.
Capacity: 16K words.For 3-slot Backplane.Model: C200H-DA003.
Input points: 8.
Voltage input: 1 to 5V or 10 to 10 V or –10 to 10 V.For 5-slot Backplane.Model: C200H-TS002.
Temperature sensor: Thermocou-ples: K (CA)/L (Fe-CuNi)(DIN)(selectable)
Input points: 4 points/Unit max. (1, 2, or 4 points can be selected)Model: C200H-BC031-V2.
No. of I/O slots: 3 slots.For 5-slot Backplane.For 3-slot Backplane.8 pts, No-voltage contact. NPN.Model: C200H-CN131.
Cable length: 1, 000cm.Short protectionn for 10-pin terminal block (package of 10 covers) C200H-ASC02. 8 pts.Model: C200H-ID501.
No. of inputs: 32 pts.
Specifications: 5 VDC.Model: C200H-IA122.
No. of inputs: 16 pts.
Input voltage: 100 to 120 VAC, +10%/–15%.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler C200H-ASC02.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tio