AGF-2-R2 | OMRON High voltage ground relay AGF-2-R2

OMRON AGF-2-R2 Product information and technical parameters：
Brand: OMRON
Name: High voltage ground relay
Model: AGF-2-R2
Open circuit: voltage, no voltage, DC circuit breaker.
Appearance: R2 shell, also has F4 shell.
Rated current: AC110V.
Rated frequency: 50/60Hz.
Consume VA: action time 10VA below (except for reactor part).
Action current adjustment range (zero phase converter primary current):
0.1-0.2-0.3-0.4-0.6A (5 shunt).
Control output: -.
Relay control output for switching circuit breakers: power through capacity, C110V/10A;
Switch capacity: AC110V/10A (COS =1).
Quality: about 2kg.
External: Mount Searl N1.5.
High voltage grounding relay AGF type, anti wave interference,
Arc grounding, short circuit capability, high reliability.
The anti - interference ability is strong, and can safely correspond to the arc grounding fault.
The grounding relay and the zero phase converter ZCT can be separately used.
(any combination is not more than JIS of the specified error range, and therefore can be used)
Can carry out fine current adjustment, easy to coordinate.
In all the models set up alarm terminal.

Cable: With cable.
Connector: Connectors on both cable ends.
Cable length: 3 m.
Minimum order: 5.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock OMRON AGF-2-R2.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors AGF-2-R2
A full line-up of models is planned.
Connectors with Cables are UL approved. No. of cable cores: 4.
Cable connection direction: Right-angle/Right-angle.
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements OMRON AGF-2-R2.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Communications: None.
UL Class 2 output: Not compliant.
Complete Flexible DC Circuit Protector That OMRON AGF-2-R2.
Has a Wide Array of Displays, Alarm,
Outputs, and Other Digital Functions.
Four circuit protectors in one package.
Simple setting of current tripping values for each branch outputs,
in 0.1-A units.
Startup and shutdown sequence control.
Display and alarm functions (Input voltage, output current,
run time, and over-temperature),
Outputs conform to UL Class 2 (at 24 VDC, S8M-CP04-RS only),
DIN Rail mounting.
RoHs-compliant.
Free Support Tool available. Specifications: Connector with DC line connected(For parallel operation).
Number of Connectors: 1 Connector.
Block-type Switch Mode Power Supply That.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models).
One model covers 60 to 240 W (24-V models).
Easy creation of multi-power suppply configurations with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels) AGF-2-R2.
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditioons: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable AGF-2-R2. )
Operating temperatures to –20°C (24-V models).

...More relevant models >>>>