Home
>> Products
>> OMRON
>> Switch
>> Push button switch
>> button switch φ16 with light / without light / display lamp
>> A16L-JYM-12D-1 | OMRON Pushbutton Switch A16L-JYM-12D-1
A16L-JYM-12D-1 | OMRON Pushbutton Switch A16L-JYM-12D-1
OMRON A16L-JYM-12D-1 Manual And Instructions
A16L-JYM-12D-1 datasheetPDF datasheet
OMRON A16L-JYM-12D-1 Product information and technical parameters：
Brand: OMRON
Name: Pushbutton Switch
Model: A16L-JYM-12D-1
Output: SPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
...More relevant models >>>>
A16L-JYM-12D-1 datasheetPDF datasheet
OMRON A16L-JYM-12D-1 Product information and technical parameters：
Brand: OMRON
Name: Pushbutton Switch
Model: A16L-JYM-12D-1
Output: SPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
Actuator: General purpose; Crossroller plunger; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity OMRON A16L-JYM-12D-1.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches A16L-JYM-12D-1 DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard) OMRON A16L-JYM-12D-1.
(Ask your OMRON representative for information on approved models.)Appearance: Round/Flat type A22-F.
Output: SPST-NO + SPST-NC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit OMRON A16L-JYM-12D-1.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Product name: Conductive Level Controller.
Model number: Relay contact (SPST-NO).
Battery (24 VDC) allows use in locations.
without AC power supply. AC sine-wave.
voltage between electrodes enables stable.
detection with no eelectric corrosion A16L-JYM-12D-1.
Outputs can be set to self-hold at ON or OFF using special circuits.
Adjustable sensitivity, with an operating resistance range of 0 to,
100 kΩ, allows use for a wide variety of liquids.
Relay contact chatterinng conventionally caused by waves elim,
inated using open collector output, reducing contact wear A16L-JYM-12D-1.
Meets CE marking and is a UL recognized component.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity OMRON A16L-JYM-12D-1.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches A16L-JYM-12D-1 DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard) OMRON A16L-JYM-12D-1.
(Ask your OMRON representative for information on approved models.)Appearance: Round/Flat type A22-F.
Output: SPST-NO + SPST-NC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit OMRON A16L-JYM-12D-1.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Product name: Conductive Level Controller.
Model number: Relay contact (SPST-NO).
Battery (24 VDC) allows use in locations.
without AC power supply. AC sine-wave.
voltage between electrodes enables stable.
detection with no eelectric corrosion A16L-JYM-12D-1.
Outputs can be set to self-hold at ON or OFF using special circuits.
Adjustable sensitivity, with an operating resistance range of 0 to,
100 kΩ, allows use for a wide variety of liquids.
Relay contact chatterinng conventionally caused by waves elim,
inated using open collector output, reducing contact wear A16L-JYM-12D-1.
Meets CE marking and is a UL recognized component.
...More relevant models >>>>
Last one: 
next one: Related download