OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON GX-OD1618 Manual GX-OD1618 INSTRUCTION MANUAL

OMRON GX-OD1618 Manual GX-OD1618 INSTRUCTION MANUAL

Brand: OMRON
Product model: GX-OD1618
Name: Digital Temperature Controllers
Sort: INSTRUCTION MANUAL
File language: English
File size: 1.67MB
Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 40 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track GX-OD1618 INSTRUCTION MANUAL.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2 GX-OD1618)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation). Terminal (wire connection): Screw terminal.
Applicable output load: DC load GX-OD1618 INSTRUCTION MANUAL.
Zero cross function: --.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals GX-OD1618 INSTRUCTION MANUAL.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Main contacts: 3PST-NO.
Auxiliary contact: SPST-NC.
Number of input channels: 1 channel or 2 channels.
Reset mode: Manual reset.
Input type: + common.
Rated voltage: 24 VAC/VDC.
Ultra Slim Safety Relay Unit.
Models of width 17.5 mm available with 2 or 3 poles. Models.
of width 22.5 mm with 3 poles also available.
Conforms to EN standards. (TÜV approval).
DIN track mounting possible. Terminal (Wire connection): Push-In Plus Terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 48V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA ussing Au-plated GX-OD1618 Manual.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed locatiion) GX-OD1618 Manual.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.
Related products
OMRON
EtherCAT Remote I/O Terminals
GX-OD1611
OMRON EtherCAT Remote I/O Terminals GX-OD1611
Input capacity: 16 points. Rated current ON
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-OD3218
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-OD3218
Input capacity: 32 points. Rated current ON
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-OD1618
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-OD1618
Input capacity: 16 points. Rated current ON
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-OD1622
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-OD1622
Input capacity: 16 points. Rated current ON