OMRON GX-ID3228 Manual GX-ID3228 PROGRAMMING MANUAL

Isolation: Phototriac coupler.
Zero cross function: No.
Indicator: Yes.
Rated output load: 3 A at 100 to 240 VAC (See note 1.).
Rated input voltage: 5 VDC.
International Standards for G3F Series,
Same Profile as MY Power Relays.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”) GX-ID3228 PROGRAMMING MANUAL.
Socket type, same size as MY Power Relays GX-ID3228
Operation indicator provided to confirm input.
(model numbers with “N” before the suffix). Slimmest OMRON plug-in SSR with maximum width 6.2 mm.
Long electrical life and high speed switching.
Large plug-in terminals for reliable connection.
G3RV-D (DC load) models can manage resistive loads of 100 µA to 3 GX-ID3228 PROGRAMMING MANUAL. 0 A.
LED indicator for visible operation checking
Convenient quick electrical connections possible with G3RV push-in models and cross bar connectors.
Low power consumption for energy savings.
G3RV is cUL listed when correct relay is matched with the G3RV Socket.Cable /G79-Y_C with loose wire connecting terminal.
L size: 1500mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable GX-ID3228 PROGRAMMING MANUAL. Terminal (Wire connection): Push-In Plus Terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: AC, 110V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA ussing Au-plated GX-ID3228 Manual.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed locatiion) GX-ID3228 Manual.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.