OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-ID32BV-1 Manual DRT2-ID32BV-1 PROGRAMMING MANUAL

OMRON DRT2-ID32BV-1 Manual DRT2-ID32BV-1 PROGRAMMING MANUAL

Brand: OMRON
Product model: DRT2-ID32BV-1
Name: Programmable Terminals
Sort: PROGRAMMING MANUAL
File language: English
File size: 22.25MB
Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Center roller lever.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models DRT2-ID32BV-1 PROGRAMMING MANUAL. )
Sealing characteristics that meet IEC IP67 degree of protection DRT2-ID32BV-1
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables DRT2-ID32BV-1 PROGRAMMING MANUAL.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release DRT2-ID32BV-1 PROGRAMMING MANUAL.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertioon point DRT2-ID32BV-1 Manual.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames DRT2-ID32BV-1 Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Related products
OMRON
e-CON Connector Terminals
DRT2-ID16S-1
OMRON e-CON Connector Terminals DRT2-ID16S-1
Specifications: Inputs PNP - common 16 in
OMRON
Board Terminals with MIL Connector
DRT2-ID32B-1
OMRON Board Terminals with MIL Connector DRT2-ID32B-1
Specifications: Inputs, PNP - common, 32 in