OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT1-ID16-1 Manual DRT1-ID16-1 OPERATION MANUAL

OMRON DRT1-ID16-1 Manual DRT1-ID16-1 OPERATION MANUAL

Brand: OMRON
Product model: DRT1-ID16-1
Name: Programmable Terminals
Sort: OPERATION MANUAL
File language: English
File size: 7.43MB
Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Crossroller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models DRT1-ID16-1 OPERATION MANUAL. )
Sealing characteristics that meet IEC IP67 degree of protection DRT1-ID16-1
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers DRT1-ID16-1 OPERATION MANUAL.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release DRT1-ID16-1 OPERATION MANUAL.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key inserttion point DRT1-ID16-1 Manual.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames DRT1-ID16-1 Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Related products
OMRON
CompoNet Gateway Unit for CC-Link
CRT1-MD16-1
OMRON CompoNet Gateway Unit for CC-Link CRT1-MD16-1
Name: Two-tier Screw Terminal Block. Specifi
OMRON
Digital I/O Units
GT1-ID16-1
OMRON Digital I/O Units GT1-ID16-1
Unit: Terminal lock model. I/O classificati
OMRON
Expansion Units
XWT-ID16-1
OMRON Expansion Units XWT-ID16-1
Name: Expansion Units. Specifications: input
OMRON
CompoNet Gateway Unit for CC-Link
CRT1-OD16-1
OMRON CompoNet Gateway Unit for CC-Link CRT1-OD16-1
Name: Two-tier Screw Terminal Block. Specifi