OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT1-ID16 Manual DRT1-ID16 OPERATION MANUAL

OMRON DRT1-ID16 Manual DRT1-ID16 OPERATION MANUAL

Brand: OMRON
Product model: DRT1-ID16
Name: Programmable Terminals
Sort: OPERATION MANUAL
File language: English
File size: 7.43MB
Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+3NC.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns DRT1-ID16 OPERATION MANUAL.
Standard gold-clad contacts enable use with ordinary loads,
and microloads DRT1-ID16
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Type: 2-Conduit.
Contact configuration: Slow-action; 2NC/1NO DRT1-ID16 OPERATION MANUAL.
Conduit opening/Connector: G1/2.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement DRT1-ID16 OPERATION MANUAL.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Ratings: Standard load; 5 A at 125 VAC.
Cable: VCTF cable *2.
Actuator: Roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cabble lengths of 3 and 5 m available on standard models DRT1-ID16 Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DRT1-ID16 Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-ID1612
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-ID1612
Input capacity: 16 points. Internal I/O comm
OMRON
I/O Relay Terminal
G70V-SID16P-1
OMRON I/O Relay Terminal G70V-SID16P-1
Terminals: Push-In Plus terminal locks. Typ
OMRON
Time interval table
K3HB-PNB-A-DRT1 AC100-240
OMRON Time interval table K3HB-PNB-A-DRT1 AC100-240
Input type: NPN/ voltage pulse input type. E
OMRON
I/O Relay Terminal
G70V-ZID16P-1
OMRON I/O Relay Terminal G70V-ZID16P-1
Applicale I/O Relay Terminal: G70V-SID16P-1.