OMRON CRT1-VAD02SD Numerical indicator type Manual CRT1-VAD02SD PROGRAMMING MANUAL

Output method: Analog resolution: 1/6000.
Analog Outputs: 4.Output method: Transistor sourcing.
Inputs: 12.
Outputs: 8.Unit type: CJ1 Basic I/O Units.
Product name: Transistor Output Units.
Specifications: Output type, Sourcing;
I/O points, 8 outputs;
Maximum switching capacity, 24VDC,
0.5A Short-circuit protection;
Commons, 8 points, 1 common;
External connection, Removable terminal block CRT1-VAD02SD PROGRAMMING MANUAL CRT1-VAD02SD
No. of words allocated: 1 word.
Current consumption: 5V, 0.10A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices CRT1-VAD02SD PROGRAMMING MANUAL.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput. Model: CPM2C-8ET1M. Units with relay outputs only.
1 MIL connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Model: CPM2C-10C1DT1C-D. CPU Unit: Units with 10 I/O points.
2 Fujitsu connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC CRT1-VAD02SD PROGRAMMING MANUAL.
Output type: sourcing transistor.
Internal clock: Yes.Model: CPM2C-8ETM. Units with relay outputs only.
1 MIL connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Name: Temperature Input Units.
Specifications: Thermocouple Input; 4 inputs;
Switchable between.
(R, S, K, J, T, E, B, N, L, U, W, PL2)
Standards: CE, UC, UC1, N .
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: CS1D Duplex Unit.
Specifications: Applicable systems,
Duplex CPU, Dual I/O Expansion System only;
Basic functions, Duplex CPU Unit processing,
error monitoring, and CPU Unit switching,
when error occurs;
Online Replacement, Supported CRT1-VAD02SD Numerical indicator type Manual.
Current consumption: 5V system, 0 CRT1-VAD02SD Numerical indicator type Manual. 41A;
26 V system, --.
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.