OMRON CP1L-M60DR-A Manual CP1L-M60DR-A INSTRUCTIONS REFERENCE MANUAL

C1000HF-CPUA1 Omron Programmable Control CPU C1000HF-CPUA1-V1.CP1W-CIF41.
One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.100 to 120/200 to 240 VAC (switchable), Wired.Unit type: CS1 Basic I/O Units.
Product name: DC Input/Transistor Output Unit CP1L-M60DR-A INSTRUCTIONS REFERENCE MANUAL.
Specifications: 24 VDC, approx. 5 mA
48 inputs, 12 to 24 VDC, 0 CP1L-M60DR-A1 A,
48 outputs Sinking.
Mountable Racks: CPU Rack, CS1W-BC,
@@3, Yes, @@2, Yes;
C200HX/HG/HE Expansion I/O Rack, No.
CS1 Expansion Rack, CS1W-BI,
@@3, Yes, @@2, Yes;
CS1 Long distance Expansion Rack, Yes;
SYSMAC BUS Slave Rack, No.
Words required: 3 input words and 3 output words.
Current consumption: 5V system, 0 CP1L-M60DR-A INSTRUCTIONS REFERENCE MANUAL. 35A;
26 V system, --.
Standards: U, C, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. Feeding unit while the SYSMAC LINK Unit 2
If you need to.I/O points: 512 pts.
Program capacity(words): 15.2 K.
DM capacity (words): 6 K.
EM capacity (words): 6 K.
RS-232C port: YES.Unit type: CS1 Special I/O Units.
Product name: Isolated-type Resistance,
Thermometer Input Units (Ni508 CP1L-M60DR-A INSTRUCTIONS REFERENCE MANUAL. 4 Ω).
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: INi508.4.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacee compared,
with previous systems CP1L-M60DR-A Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-M60DR-A Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.