OMRON CP1L-M40DR-D Manual CP1L-M40DR-D INSTRUCTIONS REFERENCE MANUAL

SYSMAC NET Link Unit.
A Bus Connection Unit must be ordered separately.
C200HS Communications SYSMAC NET Interface C200HS-SNT32.Model: CPM2A-40CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 24 points.
Outputs points: 16 points.Number of outputs: 32 pts.
Max. switch-ing capacity: 0 CP1L-M40DR-D INSTRUCTIONS REFERENCE MANUAL. 5 A at 24 V DC.
External connector: Connector CP1L-M40DR-D
Weight: 210 g max.Model : CVM1D-PA212.
12A.
Attach two things in the same format in each base Please you.Model: CPM2C-32EDTM. Units with 32 I/O points
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Name: External Connector.
Model: C500-CE402.
Specifications: olderless terminal; 40p and a Connector Cover (Crimp-type)Unit type: CS1 Special I/O Units CP1L-M40DR-D INSTRUCTIONS REFERENCE MANUAL.
Product name: Isolated-type,
2-Wire Transmitter Input Unit.
Input points : 4 inputs.
Signal range: 4 to 20 mA, 1 to 5 V.
Conversion speed (resolution):
100ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.16A.
Standards: UC1, CE CP1L-M40DR-D INSTRUCTIONS REFERENCE MANUAL.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacee compared,
with previous systems CP1L-M40DR-D Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-M40DR-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.