OMRON CP1E-N30S1DT-D Manual CP1E-N30S1DT-D REFERENCE MANUAL

Name: DeviceNet Master Module.
Model: C200HW-DRM21-V1.
Baud rate: 500, 250, or 125 kbps (selectable)

DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet.Connects Power Supply Adapter and SYSMAC NET Link Unit.
For 2 Unit.UM: 31.2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words CP1E-N30S1DT-D REFERENCE MANUAL.
Instruction processing time (basic instructions): 0 CP1E-N30S1DT-D1 µ.s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.Applicable CPU Units: CQM1H-CPU51/61.
Absolute Encoder inputs: 2 inputs.
Dimensions: 25 × 110 × 107 mm (W × H × D) CP1E-N30S1DT-D REFERENCE MANUAL.
Weight: 90 g max.
Name: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N30S1DT-D REFERENCE MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name: ASCII Module.
Model: C200H-ASC11.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-232C(peripheral deviModel: CPM2A-30CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 18 points.
Outputs points: 12 points.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No. of axes: 16 axes.
No. of unit numbers allocateed: 1 CP1E-N30S1DT-D Manual.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps bbaud rate enables fast,
and accurate position control CP1E-N30S1DT-D Manual.
A wide range of position control,
functions are available with,
this position control unit.