OMRON CP1E-N30DT1-A Hardware Manual CP1E-N30DT1-A PROGRAMMING MANUAL

C200H Power Supply Aux PS for SLK11 C200H-APS03.
Required when supplying backup power.Model: C500-CN531.
Cable length: 50 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.
Unit classification: CJ1 Special I/O Units.
Product name: ProcessInput Units,
(Isolated-type Thermocouple Input Units) CP1E-N30DT1-A PROGRAMMING MANUAL.
Input points: 2 inputs.
Signal range selection:
Set separately for each input CP1E-N30DT1-A
Signal range: Thermocouple:
B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII DC voltage: ±100 mV.
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000.
Accuracy at ambient temperature of 25°C:
Standard accuracy: ±0.05% of F.S.
External connection: Removable terminal block CP1E-N30DT1-A PROGRAMMING MANUAL.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 24V, 0.06A.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage) CP1E-N30DT1-A PROGRAMMING MANUAL.
All inputs are isolated. Model : CV500-CIF01.
Port for peripherals (6m) 25-pin.C500-ID Special I/O Unit ID Sensor Unit For the C500-IDS22 C500-IDA22.Name: MIL Connectors.
Specifications: Inputs/Outputs;
16 inputs/16 outputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Commmunications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-N30DT1-A Hardware Manual. ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name: ASCII Moodule CP1E-N30DT1-A Hardware Manual.
Model: C200H-ASC02.
ASCII/BASIC Module Utility Software: For AT-compatible computers. enables program development, downloading, uploading, etc.