OMRON CJ1W-OD232 Hardware Manual CJ1W-OD232 OPERATION MANUAL

Supply voltage: 24V DC.
Output capacity: DC5V, 6.5A.C200H A Backplane Isolating Panel For 3 Slots C200H-ATT02Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Type: Counter inputs, pulse outputs.
12 DC inputs: Yes CJ1W-OD232 OPERATION MANUAL.
Counter inputs: None.
Analog inputs: None.
8 transistor outputs: Yes CJ1W-OD232
2 pulse outputs: No.
2 analog outputs: No.C500-OA I/O Unit Triac Output 24 pts C500-OA223(3G2A5-OA223).
AC250V 1A.Name: Compact Connectors.
Specifications: Inputs; 4 outputs; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit CJ1W-OD232 OPERATION MANUAL.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. CV500-BS CPU Bus Unit BASIC Unit CV500-BSC11 CJ1W-OD232 OPERATION MANUAL.
RS-232C: 2 ports, RS-422: 1 port.Model: C200H-OD217.
No. of points: 12 pts.
Specifications: 5 to 24 VDC. source type (PNP).Model: C500-BC091(3G2A5-BC091).
8 slots(6 linkable slots).
Unit name: Loop Control Boards.
Specifications: No. of function blocks:
500 blocks max.
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integrating hardware, software,
and networking to meet your needs.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control.
A wide range of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier. C500-OA I/O Unit Triac Output 16 pts C500-OA226.
AC250V 1.2A.Unit type: 10 I/O points 6 inputs; 4 outputs, Connector.
Input: 6 points: 24 VDC.
Output: 4 points: transistor (sinking).
Clock: Yes.
Slaves with the Complex Functionality Needed,
for Distributed Blocks.
Programmable Slaves combine devices, such as sensors and actuators,
into one functional unit that is treated as a DeviceNet slavve CJ1W-OD232 Hardware Manual.
Programmable Slaves greatly facilitate device distribution,
and functional organization.
They help standardize programming between units and reduce the amount of,
programming required at the master.
I/O and operattional checks can be performed for each functional unit,
rather than waiting CJ1W-OD232 Hardware Manual.
for final system assembly, as with conventional distributed I/O systems.