OMRON
Home >> Download >> OMRON >> Catalog Download >> OMRON DRT2-ID16SLH-1 datasheet PDF catalog DRT2-ID16SLH-1 PDF datasheet

OMRON DRT2-ID16SLH-1 datasheet PDF catalog DRT2-ID16SLH-1 PDF datasheet

Brand: OMRON
Product model: DRT2-ID16SLH-1
Name: Screw-less Clamp Terminals with Transistors
Sort: PDF datasheet
File language: English
File size: 21.23MB
Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ DRT2-ID16SLH-1 PDF datasheet.
Conduit size (See Note.): M20 DRT2-ID16SLH-1
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) DRT2-ID16SLH-1 PDF datasheet.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors DRT2-ID16SLH-1 PDF datasheet. Actuator: Roller plunger.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 andd 5 m available on standard models DRT2-ID16SLH-1 datasheet PDF catalog.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DRT2-ID16SLH-1 datasheet PDF catalog.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-ID16SLH-1
OMRON Screw-less Clamp Terminals with Transistors DRT2-ID16SLH-1
Short/disconnection detection: Supported. Sp
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-OD16SLH-1
OMRON Screw-less Clamp Terminals with Transistors DRT2-OD16SLH-1
Short/disconnection detection: Supported. Sp
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-ID16SLH
OMRON Screw-less Clamp Terminals with Transistors DRT2-ID16SLH
Short/disconnection detection: Supported. Sp
OMRON
Board Terminals with MIL Connector
DRT2-ID32B-1
OMRON Board Terminals with MIL Connector DRT2-ID32B-1
Specifications: Inputs, PNP - common, 32 in