OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON G3J-T205BL Manual G3J-T205BL INSTRUCTION MANUAL

OMRON G3J-T205BL Manual G3J-T205BL INSTRUCTION MANUAL

Brand: OMRON
Product model: G3J-T205BL
Name: solid-state contactor
Sort: INSTRUCTION MANUAL
File language: English
File size: 13.57MB
Contact configuration: Four SPST-NO relays.
Heat sink: Yes.
Built-in SSRs: G3SD-Z01P-PD.
Zero cross function: No.
Applicable output load: 1 A at 3 to 26 VDC (See note 2.).
Rated voltage: 5 VDC, 12 VDC, 24 VDC.
Compact Terminal SSR with 4 Outputs.
Easy-to-use SSR block that combines four compact G3S SSRs,
sockets, and heat sink in one unit G3J-T205BL INSTRUCTION MANUAL.
Easy wiring with separate I/O terminal construction G3J-T205BL
LED operation indicator.
Special socket used for easy Relay replacement.
Mounts either on DIN track or with screws. Main contacts: 3PST-NO.
OFF-delay contacts: DPST-NO.
Auxiliary contact: SPST-NC.
Number of input channels: 1 channel or 2 channels possible.
OFF-delay time: 30 s.
Rated voltage: 24 VAC/VDC; 100 to 240 VAC G3J-T205BL INSTRUCTION MANUAL.
The G9SA Series Offers a Complete.
Line-up of Compact Units.
Four kinds of 45-mm wide Units are available:
A 3-pole model, a 5-pole model, and models with 3 poles,
and 2 OFF-delay poles, as well as a Two-hand Controller.
Also available are 17.5-mm wide Expansion Units with 3,
poles and 3 OFF-delay poles.
Simple expansion connection.
OFF-delay models have 15-step OFF-delay settings G3J-T205BL INSTRUCTION MANUAL.
Conforms to EN ISO13849-1 (PLe/Safety Category 4).
Both DIN track mounting and screw mounting are possible. Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 60 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat ssink G3J-T205BL Manual.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load G3J-T205BL Manual.
Certified by UL, CSA, and VDE (reinforced insulation).
Related products
OMRON
Solid State Contactor
G3J-T217BL-C AC100-240
OMRON Solid State Contactor G3J-T217BL-C AC100-240
Numer of elements: 3. Isolation method: Pho
OMRON
Simple Solid State Contactors
G3J-205BL-2 AC100-240
OMRON Simple Solid State Contactors G3J-205BL-2 AC100-240
Numer of elements: 2. Insulation method: Ph
OMRON
Solid State Contactor
G3J-T211BL-C AC100-240
OMRON Solid State Contactor G3J-T211BL-C AC100-240
Numer of elements: 3. Isolation method: Pho
OMRON
Soft-start/stop Solid State Contactors
G3J-T217BL DC12-24
OMRON Soft-start/stop Solid State Contactors G3J-T217BL DC12-24
Numer of elements: 3. Insulation method: Ph