Type: 3 wire, shielded.
Shape: 4.
Detection range: 0.8mm.
Connection mode: lead type (2m).
Wire specification: PVC (oil resistant).
Action mode NC.
PNP output.
Proximity sensors for preferred world top performance and quality.
Standard type of magnetic metal detection.
Rich variety.
According to the conditions to choose the most suitable models E2K-X8MF2 INSTRUCTION sheet.
Anti interference function of different frequency range models
E2K-X8MF2
Has excellent environmental performance.
Standard wire material for oil resistant PVC.
Test face using cutting oil material.
Standard wire jacket. Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 61 (75) E2K-X8MF2 INSTRUCTION sheet.
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization E2K-X8MF2 INSTRUCTION sheet. Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensoor Communications,
Unit or CompoNet Sensor Communications Unit E2K-X8MF2 Manual.
Appearance: Shielded, M30.
Sensing distance: 15 mm.
Model: NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions E2K-X8MF2 Manual.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.