OMRON E2K-L26MC1 Manual E2K-L26MC1 INSTRUCTION sheet

Size: 96 x 96mm.
Control output 1: relay output.
Control output 2: relay output.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 2 point (three phase heater) E2K-L26MC1 INSTRUCTION sheet.
Communication: RS-485.
Event input: 2 points E2K-L26MC1
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports E2K-L26MC1 INSTRUCTION sheet.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications E2K-L26MC1 INSTRUCTION sheet.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication.
A new type of proportional control allows you to control the valve. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checkingg of sensing,
spot position E2K-L26MC1 Manual.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. E32-T222 type: standard type; standard,
Features: with 1.5 cylinder (small),
Shape / detection distance (mm): 2270; 220; 125 (50),
Bending radius (mm): R10 E2K-L26MC1 Manual.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needs