OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-OD16TA Manual DRT2-OD16TA INSTRUCTION Manual

OMRON DRT2-OD16TA Manual DRT2-OD16TA INSTRUCTION Manual

Brand: OMRON
Product model: DRT2-OD16TA
Name: remote i/o terminal
Sort: INSTRUCTION Manual
File language: English
File size: 0.36MB
Release Key Type: Standard (metal).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ DRT2-OD16TA INSTRUCTION Manual.
Conduit size (See Note.): G1/2 DRT2-OD16TA
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) DRT2-OD16TA INSTRUCTION Manual.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors DRT2-OD16TA INSTRUCTION Manual. Specifications: Outputs; PNP (+ common); 16 points.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Release key type: Special release key.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+2NC/1NO.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns DRT2-OD16TA Manual.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. DRT2-OD16TA Manual.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.
Related products
OMRON
CompoNet Gateway Unit for CC-Link
CRT1-MD16TAH
OMRON CompoNet Gateway Unit for CC-Link CRT1-MD16TAH
Name: Three-tier Screw Terminal Block. Speci
OMRON
Transistor Remote I/O Terminals
DRT2-OD08
OMRON Transistor Remote I/O Terminals DRT2-OD08
Specifications: Outputs NPN - common 8 po
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-ID16SL-1
OMRON Screw-less Clamp Terminals with Transistors DRT2-ID16SL-1
Short/disconnection detection: Not supported.