OMRON CRT1-ID16TA Manual CRT1-ID16TA REFERENCE MANUAL

Model: C500-BC031(3G2A5-BC031).
3 slots(3 linkable slots).
OMRON PID Module C500-PID01(3G2A5-PID01-E)Model: C500-CT021.
2 pts.
50kcps 7 mode.Model: C200HW-ME64K.
Capacity: 64K words.Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection CRT1-ID16TA REFERENCE MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CRT1-ID16TA
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CRT1-ID16TA REFERENCE MANUAL. Model : C500-BP001.
Optional extension cable is necessary..High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources.

Name: High-speed Counter Module.
Model: C200H-CT001-V1.
Number of axes: 1 axis/Unit CRT1-ID16TA REFERENCE MANUAL.
Operating modes: 6.Model: CPM2C-MAD11. 2 analog inputs and 1 analog outputUnit classification: CJ1 Special I/O Units.
Product name: ProcessInput Units,
(Isolated-type Thermocouple Input Units).
Input points: 4 inputs.
Signal range selection: Common inputs.
Signal range: Thermocouple: R, S, K, J, T, L, B.
Conversion speed (resolution): Conversion,
speed: 250 ms/4 inputs.
Accuracy at ambient temperature of 25°C:
Accuracy: (±0.3% of PV or ±1°C,
whichever is larger) ±1 digit max.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
CCurrent consumption: 5V, 0 CRT1-ID16TA Manual. 25A; 24V, --.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four inpuut channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage) CRT1-ID16TA Manual.
All inputs are isolated.