Model : C500-PS222-E.
Expansion I/O Backplane Power Supply
100 to 120 VAC or 200 to 240 VAC (selectable).
Output ratings: 7 A, 5 VDC.CV500-BC Backplane CPU Exclusively for the Personal Computer Unit CV500-BC105.
Required for Hard Disk Drive Unit.C200H-COVName: Heat/Cool Temperature Control Module CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL.
Model: C200H-TV103.
Sensor: Platinum resistance thermometer: JPt100, Pt100
CS1H-CPU65-V1
Control output: Current output(transistor output used for cooling outputs).C200HW Communications Interface Module C200HW-PRT21Name: Clamp Terminal Blocks.
Specifications: Inputs/Outputs;
8 inputs/8 outputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL. Model: CPM2C-10C1DT1C-D. CPU Unit: Units with 10 I/O points.
2 Fujitsu connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: Yes.C500-ID I/O Unit DC Input 64 pts C500-ID212(3G2A5-ID212).
DC24V 10mA.Name: e-CON Connectors.
Specifications: Inputs; 32 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CS1H-CPU65-V1 Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CS1H-CPU65-V1 Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.