OMRON CS1H-CPU65-V1 Manual CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL

Name: Clamp Terminal Blocks.
Specifications: Outputs; 16 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL CS1H-CPU65-V1
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: C200H-DA002.
Input points: 4.
Voltage input: –10 to 10V.
Current input: 4 to 20 mA.Supply voltage: 100 or 230 V AC (selectable), 50/60 Hz CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).Model: C200H-CN311.
Cable length: 30cm.Product name: N@@S1- type CPU Units with 60 I/O Points.
Specifications: Power Supply, DC24V; Inputs, 36; Outputs, 24;
Output type: Transistor (sourcing).
Program capacity: 8K steps.
memory Data capacity: 8K words CS1H-CPU65-V1 INSTRUCTIONS REFERENCE MANUAL.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.31A; 24 V，0.02A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Model: C500-BC031(3G2A5-BC031).
3 slots(3 linkable slots).
A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit CS1H-CPU65-V1 Manual. C200HS-CPU33-E CPU
High-Performance CIM Version, Built-in RS-232C Port
The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic functionality as the C200HS-CPU01-E/CPU03 controllers.
This CPU may be ussed ineither SYSMAC NET and/or SYSMAC LINK communication systems CS1H-CPU65-V1 Manual.
The built-in RS-232C port supports the same communications as the C200HS-CPU21/CPU23.