OMRON CJ2M-CPU31 Manual CJ2M-CPU31 PROGRAMMING MANUAL

Model: C200HS-INT01.
Rated Input Voltage: 12 to 24 VDC +10%/–15%.
Input Impedance: 2 K.
Input Current: 10 mA typical (24 VDC).
ON Voltage: 10.2 VDC min.
OFF Voltage: 3.0 VDC max.
ON Response Time: 0.2 ms max.
OFF Response Time: 0.5 ms max.
No. of Circuits: Name: High-speed Counter Module.
Model: C200H-CT021 CJ2M-CPU31 PROGRAMMING MANUAL.
Number of axes: 2 axis/Unit.
Operating modes: 7.

High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources CJ2M-CPU31Model: CPM2C-20CDTM-D. CPU Unit: Units with 20 I/O points.
2 MIL connectors.
Inputs: 12 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.
Internal clock: --.Unit type: CS-series Special I/O Units CJ2M-CPU31 PROGRAMMING MANUAL.
Product name: Analog Input Units.
Specifications: I/O points, 8 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0 CJ2M-CPU31 PROGRAMMING MANUAL. 12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Model: CPM2C-10CDTM-D. CPU Unit: Units with 10 I/O points.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sinking transistor.
Internal clock: --.C200H A Backplane I/O Mountinng Bracket For 5 Slots C200H-ATT53 CJ2M-CPU31 Manual. Specifications: 16 Kwords without clock.Power supply: DC power supply.
Output method: Transistor output source type.
Inputs points: 24 points.
Outputs points: 16 points.Specification: Thermocouplle input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (PNP) output, 2 loops CJ2M-CPU31 Manual.