OMRON CJ1H-CPU64H Manual CJ1H-CPU64H INSTRUCTIONS REFERENCE MANUAL

Product name: N@@S1- type CPU Units with 60 I/O Points.
Specifications: Power Supply, DC24V; Inputs, 36; Outputs, 24;
Output type: Transistor (sourcing).
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.31A; 24 V，0.02A.
Standards: CE CJ1H-CPU64H INSTRUCTIONS REFERENCE MANUAL.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient CJ1H-CPU64H
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
Without Short-circuit and,
Disconnected Line Detection CJ1H-CPU64H INSTRUCTIONS REFERENCE MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CJ1H-CPU64H INSTRUCTIONS REFERENCE MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: PC Link Module.
Model: C200H-LK401.
Communications method: 2-conductor, half duplex.

PC Link Unit
Distributed control using the PC Link Unit.Model : CV1000-DM641.
Available CV1000/2000/CVM1-CPU21-V2.
64K words.UM: 31.2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expanssion I/O Racks: 3 Racks CJ1H-CPU64H Manual.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.8 pts, No-voltage contact. PNP.Name: Position Control Module.
Model: CC200H-NC211 CJ1H-CPU64H Manual.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 2.