OMRON
Home >> Price >> OMRON >> G6C-1114P-US DC24 Pirce
Brand sort

OMRON G6C-1114P-US DC24 Pirce

No PHOTO
Brand: OMRON
Country: JAPAN
Name:
Market price: U.S.$ 8.94
(The following are the market open price not sales price!)
OMRON G6C-1114P-US DC24
Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Plastic rod.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material G6C-1114P-US DC24
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Protect motors and other equipment from unstabl.
voltages in the power supply system.
Detect overvoltages, undervoltages, voltage.
asymmetry, phase sequence, and phase loss for,
three-phase power supplies.
Phase loss detection while the motor is operating.
Global power supply support. (Changed with a switch.).
Greater resistance to inverter noise.
Width of 17.5 mm to reduce space required in panels.
Push-In Plus Terminal that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
UL listed for easy shipping to North America.
Certification is pending for LR standards.
Models added with transistor outputs for superior contact reliability. Mounting method.
Hook the upper protruding portion,
of the Slit to the upper indented,
mounting portion of the Sensor,
and adjust the position of the Slit,
so that the Slit will be in parallel to,
the lens side of the Sensor.
Press the lower protruding portion,
of the Slit onto the indented,
mounting portion of the Sensor,
until the Slit snaps in.
G6C-1114P-US DC24 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=G6C-1114P-US DC24&select=5


...more relevant model market price >>>>
Related products
OMRON
Hybrid Power Relay
G9H-210S-US DC24
OMRON Hybrid Power Relay G9H-210S-US DC24
Isolation method: Relay. Zero cross fun
OMRON
Hybrid Power Relay
G9H-205S-US DC24
OMRON Hybrid Power Relay G9H-205S-US DC24
Isolation method: Relay. Zero cross fun