OMRON S8JX-P05005C Pirce

C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD005(3G2A5-AD005).
Input: 2 pts.
Specification: -5~+5V.Display contents: Decimal.
Display color: Red/green (two colors) (See note 1.).
Type: Negative.
Zero Suppression Incorporated.
Single-color (red or green) and two-color (red or green,
selectable) displays with a character height of 25 mm are,
available for a variety of applications and locations S8JX-P05005C
Miniature design with a 43-mm depth is perfect for saving,
space in equipment and devices.
A wide power supply range from 12 to 24 VDC.
Connectors are available, which allows easy maintenance.
Negative logic input. Appearance: 4 dia.
Sensing distance: 3 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
S8JX-P05005C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=S8JX-P05005C&select=5