OMRON
Home >> Supply >> GRT1-OD8-1 OMRON GRT1-OD8-1
Search
Information sort

GRT1-OD8-1 OMRON GRT1-OD8-1


Insulation method: Photocoupler.
Operation indicator: Yes.
Zero cross function: --.
Applicable load: 1.5 A at 48 to 200 VDC.
Input rated voltage: 5 to 24 VDC.
SSR with Plug-in Terminals.
The Same Shape as the G2R-1-S.
Power Relays.
These I/O solid state relays can be mounted in OMRON GRT1-OD8-1.
G70A I/O Terminals.
Lineup includes Input Modules ffor microloads and Output,
Modules for standard loads.
Lineup also includes UL, CSA, and TüV-certified models,
(-UTU models) GRT1-OD8-1. Type: output module.
Insulation: photo coupler.
Zero crossing function: No.
Action display lamp.
Output rated voltage: DC48 1.5A ~ 200V.
Input rated voltage: DC5 ~ 24V.
Logic circuit and load interface.
I/O solid state relay.
With the input module (AC, DC), the output module (AC, DC) GRT1-OD8-1.
Product series, the color of each module to distinguish.
You can confirm the action of SSR by using the action display light.
Between input and output voltage 4000V.
Name: Slice I/O Units; Digital I/O Units.
Specifications: 8 outputs NPN OMRON GRT1-OD8-1.
Standards: CE, UC1, L.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON GRT1-OD8-1.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON GRT1-OD8-1. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 10 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation). Insulation method: Phototriac.
Operation indicator: Yes.
Zero cross function: NO.
Applicable load: 2 A at 100 to 240 VAC.
Input rated voltage: 5 to 24 VDC.
SSR with Plug-in Terminals.
The Same Shape as the G2R-1-S.
Power Relays.
These I//O solid state relays can be mounted in OMRON GRT1-OD8-1.
G70A I/O Terminals.
Lineup includes Input Modules for microloads and Output,
Modules for standard loads.
Lineup also includes UL, CSA, and TüV-certified models,
(-UTU models).
Related supply information