OMRON ZN-THS17-S Manual ZN-THS17-S User's Manual

Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. Optical system: Diffuse reflective; Regular reflective.
Measurement range: Height direction, 50±3 mm, 44±2 mm;
Width direction, 8 mm (typical) ZN-THS17-S User's Manual.
Resolution: Height direction, 1 μm;
Width direction, 13 μm (8mm/631pixels) ZN-THS17-S
ZG2 debut!
Achieving stable measurement.
through innovative technology. Power supply voltage: DC24V.
Control output: NPN output. Classification: Momentary operation.
Shape of Operation Unit: 36 dia. 25 dia.
Output: 1.
Operation Unit color: Red (-R).
Long Service Life with Built-in Z-series ZN-THS17-S User's Manual.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton construction enables use in locations subject to,
splashing water and oil and scattering dust.
Pushbuttons are available in three shapes and six colors. ZG2 debut!
Achieving stable measurement.
through innovative technology ZN-THS17-S User's Manual. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Provided.
Actuator: Hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Connection methood: Pre-wired connector ZN-THS17-S Manual.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece ZN-THS17-S Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.