OMRON ZN-DPS11C-S Manual ZN-DPS11C-S

Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: point beam.
Beam diameter: diameter of 50 m.
Resolution: 0.8 M.
Cable length: 0.5m. Type: Narrow View/Standard.
PNP.
Low-cost but advanced Smart.
Sensors combining benefits of.
optical and vision sensors.
Sensor integrated with light for easy installation ZN-DPS11C-S .
Easy operation by selecting icons while watching ZN-DPS11C-S
LCD monitor.
Ultra-high speed response for fast-moving.
production lines. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Spring plunger; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy ZN-DPS11C-S .
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Connection method: Pre-wired.
Cable length: 5 m ZN-DPS11C-S .
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Panel mount roller plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Actuator: Sealed (Booted); Sealed crossroller plunger; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models hhave also been added,
to the series ZN-DPS11C-S Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZN-DPS11C-S Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)