OMRON ZFV-SH50 Manual ZFV-SH50 User's Manual

Remarks: Attached to each Sensor Head.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching) ZFV-SH50 User's Manual.
Easily perform calculation for two Sensors by using a Calculating Unit ZFV-SH50
Prevent mutual interference for up to five Units by using a Calculating Unit. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Hinge lever; Medium OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZFV-SH50 User's Manual.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: Diffuse reflective.
Beam shape: Line beam.
Sensing distance: 300±200 mm.
Resolution: 300 μm ZFV-SH50 User's Manual.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Name: Communications Interface Unit (RS-232C).
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Optical system: diffuse type.
Detection distance: 200 positive and negative 50mm.
Beam shape: linear beam.
Beam diameter: 900mm * 100 m.
Resolution: 5 m.
Cable length: 2m. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 3.0A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing) ZFV-SH50 Manual.
Weight (Packaged): Approx. 2 kg (Approx. 3 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designned to go anywhere ZFV-SH50 Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues.