OMRON K3HB-XVD-ABCD1 Manual K3HB-XVD-ABCD1 Communications Manual

Type of input: AC current input.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with K3HB-XVD-ABCD1 Communications Manual.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table K3HB-XVD-ABCD1
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceStatic ground directional relay K2GS-B type,
Advanced ground direction relay corresponding to the diversification of ground fault K3HB-XVD-ABCD1 Communications Manual.
Feeder priority cut-off function for coordinated multi segment setting.
Prevention of low frequency vibration with other circuit accidents,
Circuit for locking circuit and preventing effect of electric wave caused by false action,
In order to improve the reliability K3HB-XVD-ABCD1 Communications Manual.
The coordination device for the zero phase action voltage is set up,
Therefore, the influence of the residual voltage can be avoided.
Due to the built-in filter, so in the event of the occurrence of the ramp wave input can also maintain a stable role,
Because of the signal level detection, it is easy to carry out the action experiment and set up the confirmation. Ideal for monitoring 3-phase power supplies.
for industrial facilities and equipment.
Monitor overvoltages, undervoltages, phase sequence, and,
phase loss for thrree-phase 3-wire or 4-wire power supplies with,
just one Unit K3HB-XVD-ABCD1 Manual.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power,
supply.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Output overvoltages and undervoltaages using separate relays K3HB-XVD-ABCD1 Manual.
World-wide power specifications supported by one Unit,
(switchable).
Output status can be monitored using LED indicator.