OMRON H8PS-SOFT-V1 Manual H8PS-SOFT-V1 Communications Manual

Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor.
Mounting method: Flush mounting, surface mounting.
Display: 7-segment LEDs (10 mm high), Up indicator.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: No.
Control output: Contact (SPST-NO) H8PS-SOFT-V1 Communications Manual.
Operating mode: Down counting.
Max.counting speed: 30 cps H8PS-SOFT-V1
All Required Counter Functions.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, a reversible (Up-Down),
counter is also available.
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC H8PS-SOFT-V1 Communications Manual.
Also, power supply for the DC-operated models is selectable,
within a range of 12 to 48 V.
Models with memory backup function against power failure available. Wiring: Screw terminals.
Backup power supply function for memory protection:
Provided (approx. 10 years at 25°C).
No. of program steps: 24 (Each ON or OFF is considered to be one step.).
Weekly Control with a Large Time Display,
Easy Programming with Large Display and Interactive,
Functions H8PS-SOFT-V1 Communications Manual.
Easy operation with five keys.
Up to 24 steps of ON/OFF operations can be set.
Power supply freely selectable from 100 to 240 VAC.
Memory protection during power failure for up to 10 years.
Certified for UL and CSA safety standards.
The same setting can be used for multiple-day operation and,
timer operation. Operating modes: Flicker OFF start.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 8-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or OON,
time settings are possible H8PS-SOFT-V1 Manual.
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range H8PS-SOFT-V1 Manual.
Length, when panel-mounted with a Socket, of 80 mm or less.
11-pin and 8-pin models are available.