Rated supply voltage: 100 to 240 VAC.
Resetting system (See note.): Electric resetting.
Control output: DPDT contact output,
(Time-limit output SPDT and instantaneous output SPDT).
Time range: 0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h).
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring H7CX-AWD1-N User's Manual.
Incorporating an easy-to-see large setting dial with moving pointers
H7CX-AWD1-N
Wide time-setting range of 0.2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1.
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards H7CX-AWD1-N User's Manual.
Six-language instruction manual provided.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
Finger protection terminal block.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Supply voltage: 24 to 240 VAC/DC.
Control output: Contact output, DPDT (time-limit DPDT,
or time-limit SPDT + instantaneous SPDT)Changed using a switch H7CX-AWD1-N User's Manual.
Eight-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M. Supply voltage: 24 to 230 VAC (50/60Hz)/24 to 48 VDC.
Control output: Contact outputt: SPDT (time-limit output SPDT) H7CX-AWD1-N Manual.
Input type: No-input available.
Operating mode(see note): Eight multi-modes: Four multi-modes: A, B2, E, J.
Model: Screw terminal type.
Eight operating modes (H3DS-M) and four operating modess,
(H3DS-S) cover a wide range of applications H7CX-AWD1-N Manual.
A wide time setting range of 0.10 s to 120 h.
Two LEDs indicate power and relay status respectively.