OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON G9SP-N10D Manual G9SP-N10D Operation Manual

OMRON G9SP-N10D Manual G9SP-N10D Operation Manual

Brand: OMRON
Product model: G9SP-N10D
Name: SERVOMOTORS/SERVO DRIVES
Sort: Operation Manual
File language: English
File size: 0.86MB
Name: Slice I/O Units; Digital I/O Units.
Specifications: AC Input 4 points.
Standards: CE, UC1, L.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system G9SP-N10D Operation Manual.
A wide variety of CompoNet Slave Units,
contribute to system size reduction G9SP-N10D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Terminal (Wire connection): Push-In Plus Terminal.
Classification: Microloads G9SP-N10D Operation Manual.
Latching lever (Test switch): No.
Rated input voltage: AC, 100V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available G9SP-N10D Operation Manual.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Insulation method: Photocoupler.
Operation indicator: Yes.
Response speed: Low-speed.
Applicable load: 4 to 32 VDC 0.1 to 100 mA.
Input rated voltage: 12 to 24 VDC.
SSR with Plug-in Terminals.
The Same Shape as the G2R-1-S.
Power Relays.
These I/O solid state relays can be mounted in OMRON.
G70A I/O Terminals.
Lineup includes Input Modules for microloads and Output,
Modules for standard loads.
Lineup also includes UL, CSA, and TÜV-certified models,
(-UTU models). Terminal (wire connection): Screw terminal.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: AC 110V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.)) G9SP-N10D Manual.
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs G9SP-N10D Manual.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.
Related products
OMRON
Safety Controller
G9SP Series
OMRON Safety Controller G9SP Series
Easy programming for complex safety control.
OMRON
Safety Controller
G9SP-N10S
OMRON Safety Controller G9SP-N10S
Name: Safety Controller. Numer of I/O: Safe
OMRON
Safety Controller
G9SP-N20S
OMRON Safety Controller G9SP-N20S
Name: Safety Controller. Numer of I/O: Safe
OMRON
Safety Controller
G9SP-N10D
OMRON Safety Controller G9SP-N10D
Name: Safety Controller. Numer of I/O: Safe