OMRON E5EC-TQX4DSM-080 RS-485 CompoWay/F Manual E5EC-TQX4DSM-080 lnstruction Manual

Appearance: 6.5 dia.
Sensing distance: 4 mm.
Connecting method: M8 Connector Models.
Cable specifications: --.
Operation mode: NO.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 E5EC-TQX4DSM-080 lnstruction Manual. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available E5EC-TQX4DSM-080
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only) E5EC-TQX4DSM-080 lnstruction Manual.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Sensing method: Distance settable.
Connection method: Connector (M8, 4 pins).
Model: NPN output.
Distance-settable Sensor Unaffected,
by Workpiece Color and Background.
Distance-settable triangulation model unaffected by color.
Simple positioning settings using a clear LED spot E5EC-TQX4DSM-080 lnstruction Manual.
(E3Z-LS@3/LS@8).
Detect minute steps. Case color: Black.
Control output: Relay output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: --.
Previous model: Thermocouple input, --;
Resistance thermometer input, --.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controlleer (auto/
manual, RUN/STOP, and alarms) and the PV or SV E5EC-TQX4DSM-080 RS-485 CompoWay/F Manual.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colorrs E5EC-TQX4DSM-080 RS-485 CompoWay/F Manual.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs.