OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-OD32B Manual DRT2-OD32B Operation Manual

OMRON DRT2-OD32B Manual DRT2-OD32B Operation Manual

Brand: OMRON
Product model: DRT2-OD32B
Name: Programmable Terminals
Sort: Operation Manual
File language: English
File size: 22.25MB
Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC DRT2-OD32B Operation Manual.
M12-connector models are available, saving on labor and,
simplifying replacement DRT2-OD32B
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Release key type: Special release key.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release DRT2-OD32B Operation Manual.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+2NC/1NO.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas DRT2-OD32B Operation Manual.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Sealed roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cablle lengths of 3 and 5 m available on standard models DRT2-OD32B Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DRT2-OD32B Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Transistor Remote I/O Terminals
DRT2-OD08-1
OMRON Transistor Remote I/O Terminals DRT2-OD08-1
Specifications: Outputs PNP common 8 po
OMRON
Transistor Remote I/O Terminals
DRT2-OD16-1
OMRON Transistor Remote I/O Terminals DRT2-OD16-1
Specifications: Outputs PNP common 16 p
OMRON
Board Terminals with MIL Connector
DRT2-MD32BV
OMRON Board Terminals with MIL Connector DRT2-MD32BV
Specifications: I/O, NPN input: common, ou