OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-MD32ML Manual DRT2-MD32ML Operation Guide

OMRON DRT2-MD32ML Manual DRT2-MD32ML Operation Guide

Brand: OMRON
Product model: DRT2-MD32ML
Name: Programmable Terminals
Sort: Operation Guide
File language: English
File size: 22.25MB
Actuator: Plastic rod.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO (Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available DRT2-MD32ML Operation Guide. )
M12-connector models are also available, saving on labor and,
simplifying replacement DRT2-MD32ML
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Actuator: Roller lever (Metal lever, resin roller) DRT2-MD32ML Operation Guide.
Cable length: 5 m.
Pull-outing direction of cable: Horizontal.
Built-in switch: 2NC (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model).
High-sensitivity safety limit switch.
Built-in switches with two- or four-contact construction are available.
Degree of protection: IP67 DRT2-MD32ML Operation Guide.
Conforms to EN115-1, EN81-1 and EN81-2.
(slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type).
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting).
Ontology: part of the controller.
Type: manual setting. Type: Welding / wire type, with right column.
Drive rod: rod type Shibai leaf.
Terminal specification: welding.
Contact specificatiions: 1c DRT2-MD32ML Manual.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used ffor easy long stroke specifications (OT reference value: 1 DRT2-MD32ML Manual. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.
Related products
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-OD32SLH-1
OMRON Screw-less Clamp Terminals with Transistors DRT2-OD32SLH-1
Short/disconnection detection: Supported. Sp
OMRON
Transistor Remote I/O Terminals
DRT2-OD16
OMRON Transistor Remote I/O Terminals DRT2-OD16
Specifications: Outputs NPN - common 16 p
OMRON
Board Terminals with MIL Connector
DRT2-MD32BV-1
OMRON Board Terminals with MIL Connector DRT2-MD32BV-1
Specifications: I/O, PNP input: - common, ou