OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-MD16S Manual DRT2-MD16S PROGRAMMING MANUAL

OMRON DRT2-MD16S Manual DRT2-MD16S PROGRAMMING MANUAL

Brand: OMRON
Product model: DRT2-MD16S
Name: Programmable Terminals
Sort: PROGRAMMING MANUAL
File language: English
File size: 22.25MB
Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models DRT2-MD16S PROGRAMMING MANUAL. )
Sealing characteristics that meet IEC IP67 degree of protection DRT2-MD16S
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers DRT2-MD16S PROGRAMMING MANUAL.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches DRT2-MD16S PROGRAMMING MANUAL.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Type: Welding / wire type, with left column.
Drive rod: leaf Shibai rod type.
Terminal specifications: with wire, under the lead.
Contact specificattions: 1a DRT2-MD16S Manual.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used ffor easy long stroke specifications (OT reference value: 1 DRT2-MD16S Manual. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.
Related products
OMRON
Board Terminals with MIL Connector
DRT2-ID32BV-1
OMRON Board Terminals with MIL Connector DRT2-ID32BV-1
Specifications: Inputs, PNP - common, 32 in
OMRON
e-CON Connector Terminals
DRT2-MD16S-1
OMRON e-CON Connector Terminals DRT2-MD16S-1
Specifications: I/O PNP input: - common, o
OMRON
Transistor Remote I/O Terminals
DRT2-OD08
OMRON Transistor Remote I/O Terminals DRT2-OD08
Specifications: Outputs NPN - common 8 po