OMRON CXONE-AL30D-V4 CX-Motion-NCF Ver. 1.9 Manual CXONE-AL30D-V4 Installation Guide

C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21.Model: C200H-OD214.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.Name: Controller Link Module.
Model: C200HW-CLK21.
Communications method: N: N token bus.
Code Manchester: codeUnit type: CS1 Special I/O Units CXONE-AL30D-V4 Installation Guide.
Product name: Power Transducer Input Unit.
Input points : 8 inputs CXONE-AL30D-V4
Signal range: 0 to 1 mA, ±1 mA.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CXONE-AL30D-V4 Installation Guide.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them CXONE-AL30D-V4 Installation Guide.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Name: Loop-control CPU Unit.
I//O bits: 960 bits CXONE-AL30D-V4 CX-Motion-NCF Ver. 1.9 Manual.
Program capacity: 10K steps.
DM words: 32K words.
EM words: 32K words × 1 bank E0_00000 to E0_32767.
Versatile Machine Control with the,
Highest Performance Standards in the Inndustry CXONE-AL30D-V4 CX-Motion-NCF Ver. 1.9 Manual. Model: CPM2C-8ETC. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.