OMRON CS1G-CPU43H Manual CS1G-CPU43H OPERATION MANUAL

I/O capacity: 512 pts (2, 048 max. with remote I/O).
Execution time: Basic: 0.15 µs min.Special: 0.6 µs min.
CV500-MC Special I/O Unit Motion Control Servo Control 4 axis CV500-MC421.100 to 120/200 to 240 VAC (switchable), Wired.Model: C200H-IA121.
No. of inputs: 8 pts.
Input voltage: 100 to 120 VAC, +10%/–15% CS1G-CPU43H OPERATION MANUAL.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler CS1G-CPU43H
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: Model: C500-CT021.
2 pts.
50kcps 7 mode.Product name: CS1 CPU Backplane.
Specifications: For CS-series,
Unit only Note: C200H series,
Units cannot be mounted; 5 slots.
Appli cable CPU Unit: CS1 CPU Unit CS1G-CPU43H OPERATION MANUAL.
Basic I/O Units: CS-series Basic I/O Unit,
Yes; C200H series Basic I/O Unit, No;
C200H Group-2 High density I/O Unit, No.
Special I/O Units: CS-series Special I/O Unit,
Yes; C200H series Special I/O Unit, No.
CPU Bus Units: CS-series CPU Bus Unit, Yes.
Current consumption: 5V system, 0.11A;
26 V system, --.
Standards: U, C, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control CS1G-CPU43H OPERATION MANUAL. Model: C500-CE401.
Solder pin connector cover 40PFeeding unit while the SYSMAC LINK Unit 2
If you need to.CV500-VP CPU Bus Unit Personal Computer Unit Main Mem CV500-VP213.
4-MB memory; w/o floating-point processor.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacce compared,
with previous systems CS1G-CPU43H Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CS1G-CPU43H Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.