OMRON CPM2A-20CDT1-D Manual CPM2A-20CDT1-D INSTRUCTION SHEET

Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No CPM2A-20CDT1-D INSTRUCTION SHEET. of axes: 2.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CPM2A-20CDT1-D36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion network with one Position,
Control Unit that supports MECHATROLINK-II.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association CPM2A-20CDT1-D INSTRUCTION SHEET. Model : CV500-CN432.
Cable I / O connection.
40M cable length.Size: 35mm.
Type: 4 lines.
Lighting voltage: DC24V.
Color: pure white.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the CPM2A-20CDT1-D INSTRUCTION SHEET.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (NPN) output, 2 loops.C500-AD Special I/O Unit Analog Input C500-AD101.
Input: 8 pts.
Specification: 0~+10V、4~20mA.C200H Accessory Interface Unit C200H-IP006Unit classification: CJ1 Special I/O Units.
name: Position control unit.
Specifications; Control method/Control,
output interface:Open-loop control by pulse,
train output/Line-driver output;
Number of control axes : 1 axis.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CPM2A-20CDT1-D Manual. 25A; 24V, --.
Standards: UC1, CE.
High-speed, High-precision positioning,
with 1, 2, or 4 axes.
Versatile functions and superb performance,
enable the construction of compact,
high-performance machiines CPM2A-20CDT1-D Manual.
With its ultra-compact size of 31 × 90mm (W×H),
this highly space-efficient Position Control Unit,
(PCU) enables up to 4 axes of motor control.