OMRON CPM1A-30CDT-D-V1 Manual CPM1A-30CDT-D-V1 HOST CONNECTION MANUAL

Model : C500-LK203.
RS-232C/RS-422.Name: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CPM1A-30CDT-D-V1 HOST CONNECTION MANUAL.
Bit-level I/O distribution reduces,
wiring in the system CPM1A-30CDT-D-V1
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Power supply voltage: 100 to 240VAC CPM1A-30CDT-D-V1 HOST CONNECTION MANUAL.
Output capacity: 5-VDC output capacity, 2.8A;
24-VDC output capacity, 0.4A;
Total power consumption, 14w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement.
notification function for easy,
maintenance CPM1A-30CDT-D-V1 HOST CONNECTION MANUAL.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options. Name: MIL Connectors.
Specifications: Inputs/Outputs;
16 inputs/16 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CPM1A-30CDT-D-V1 Manual.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location annd,
content of the error CPM1A-30CDT-D-V1 Manual. Model: CPM2A-40CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 24 points.
Outputs points: 16 points.