OMRON CP1E-NA20DT-D Software Manual CP1E-NA20DT-D PROGRAMMING MANUAL

Model: C1000H-TER01.
Each node requires one of the ends of the network.Name: Compact Connectors.
Specifications: Outputs; 2 inputs; NPN.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit CP1E-NA20DT-D PROGRAMMING MANUAL.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices CP1E-NA20DT-D
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA002(3G2A5-DA002) CP1E-NA20DT-D PROGRAMMING MANUAL.
Output: 2 pts.
Specification: 0~+10V.Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.3% of F CP1E-NA20DT-D PROGRAMMING MANUAL. S. Current: ±0.5% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 200mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0.2*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals.
Model: C500-CE401.
Solder pin connector cover 40PName: e-CON Connectors.
Specifications: Outputs; 8 outputs ; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reducced CP1E-NA20DT-D Software Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-NA20DT-D Software Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.