OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON CP1E-N40S1DT1-D Communications Commands Manual CP1E-N40S1DT1-D USER'S MANUAL

OMRON CP1E-N40S1DT1-D Communications Commands Manual CP1E-N40S1DT1-D USER'S MANUAL

Brand: OMRON
Product model: CP1E-N40S1DT1-D
Name: Programmable Terminals
Sort: USER'S MANUAL (Communications Commands)
File language: English
File size: 2.74MB
Model: C500-CPU11-EV1.
C500-CP CPU CPU MODULE JAPANESE C500-CPU11-EV1Model : C500-PS212.
Expansion I/O Backplane Power Supply
24 VDC.
Output ratings: 7 A, 5 VDC.Product name: CJ2M (Built-inEtherNet/IP) CPU Units.
Specifications: I/O capacity/Mountable Units(Expansion Racks),
2, 560 points/40 Units(3 ExpansionRacks max CP1E-N40S1DT1-D USER'S MANUAL. );Programcapacity,
10K steps;Data memorycapacity, 64K words,
(DM: 32K words, EM: 32K words ×1 bank);
LD nstruction execution time, 0 CP1E-N40S1DT1-D 04 μs;
EtherNet/IP function: YES;
Option board slot: YES.
Current consumption (A): 5V, 0. 7(See note. );24V, --.
Standards: UC1, N, L, CE.
CJ2M for basic machine automation.
The CJ2M Series is ideal for packaging and general CP1E-N40S1DT1-D USER'S MANUAL.
machine automation needs. Connectivity is assured.
thanks to the built-in USB port and the choice of.
Ethernet and RS-232C/422/485 interfaces on the CPU. Model : CVM1D-CPU21.
For duplex system requires two.Specification: Platinum resistance thermometer input (Pt100, JPt100),
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 4 loops.CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 100 VAC CV500-FHD01-EUnit type: CS-series Special I/O Units CP1E-N40S1DT1-D USER'S MANUAL.
Product name: Analog Input Units.
Specifications: I/O points, 4 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Model : CVM1-MP201-V2.
Position Control Unit (NC222) for.Name: Clamp Terminal Blocks.
Specifications: Inputs/Outputs;
8 inputs/8 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I//O distribution reduces,
wiring in the system CP1E-N40S1DT1-D Communications Commands Manual.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-N40S1DT1-D Communications Commands Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.
Related products
OMRON
CP1E CPU Units
CP1E-N40DT-D
OMRON CP1E CPU Units CP1E-N40DT-D
Product name: N-type CPU Units with 40 I/O
OMRON
CP1E CPU Units
CP1E-N30S1DT1-D
OMRON CP1E CPU Units CP1E-N30S1DT1-D
Product name: NS1- type CPU Units with 30 I
OMRON
CP1E CPU Units
CP1E-N40DR-D
OMRON CP1E CPU Units CP1E-N40DR-D
Product name: N-type CPU Units with 40 I/O
OMRON
CP1E CPU Units
CP1E-N40S1DR-A
OMRON CP1E CPU Units CP1E-N40S1DR-A
Product name: NS1- type CPU Units with 40 I