OMRON CP1E-N14DT-D Communications Commands Manual CP1E-N14DT-D USER'S MANUAL

Model : CVM1-PRO01-V1.
Position Control Unit (NC222) for.
Body.For 5-slot Backplane.Name: e-CON Connectors.
Specifications: Outputs; 8 outputs ; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CP1E-N14DT-D USER'S MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N14DT-D
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-N14DT-D USER'S MANUAL. Model: CPM2C-10CDT1C-D. CPU Unit: Units with 10 I/O points.
2 Fujitsu connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Model : CVM1-DRM21-V1.
CVM1/CV series for.Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 CP1E-N14DT-D USER'S MANUAL.
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Model: CPM2C-10C1DR-D. CPU Unit: Units with 10 I/O points.
I/O terminal block.
Inputs: 66 inputs CP1E-N14DT-D Communications Commands Manual.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: relay.
Internal clock: Yes.Model: C200H-ID211.
No. of inputs: 8 pts.
Input voltage: 12 to 24 VDC, +10%/–15%.
Input current: 10mA, 24VDC.
Isolaation: Photo-coupler CP1E-N14DT-D Communications Commands Manual.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: 10m